[SMM Analysis] Review of the Nickel Intermediate Product Market During the 2026 Chinese New Year Holiday and Post-Holiday Outlook

Published: Feb 24, 2026 01:03
Review and Post-Holiday Outlook of the Nickel Intermediate Product Market During the 2026 Chinese New Year Holiday

Happy Start of Work!

I. Price Review

The nickel intermediate product market experienced a holiday-induced standstill, with coefficients remaining flat. For MHP, there were few market transactions. On the supply side, upstream smelters had sold out their Q1 supply, and Q2 offers were not yet available. Although traders provided sporadic offers, few deals were finalized against the backdrop of unclear direction from both upstream and downstream participants. On the demand side, some downstream nickel salt smelters halted operations during the holiday, while other normally operating producers consumed their raw material inventories, resulting in minimal procurement activity by enterprises. Under the overall tight supply-demand balance, the MHP nickel payables and cobalt payables held firm at high levels this week. For high-grade nickel matte, the market maintained a tight supply-demand balance, with coefficients remaining unchanged.

Regarding nickel prices during the Chinese New Year holiday, prices surged before the holiday as Indonesia significantly cut its 2026 nickel ore RKAB quota to approximately 250-260 million mt, fueling strong bullish sentiment in the market. After pulling back during the holiday, prices rebounded. On February 17, LME nickel closed at $16,830/mt, down 1.81% from the previous trading day. From February 18 to 20, influenced by a tailings landslide accident at the Indonesian IMIP park, LME nickel prices saw a noticeable rebound, but overall, they continued to fluctuate below $18,000/mt. In summary, nickel prices rose MoM during the Chinese New Year holiday.

Combining coefficients, during the 2026 Chinese New Year holiday (February 15 to February 23), prices for MHP and high-grade nickel matte increased, and the cobalt price for MHP also rose.

II. Industry Developments

On January 18, 2026, a tailings dam at a nickel intermediate product project in an Indonesian park experienced a landslide accident. The affected area is currently suspended from operations.

III. Post-Holiday Outlook

For nickel intermediate product coefficients, in the MHP market, due to expectations of strong nickel price performance combined with low downstream acceptance of high prices, the nickel payables are expected to have slight downside room after the holiday, while cobalt payables are anticipated to hold firm at high levels. In the high-grade nickel matte market, strong cost support and sellers' firm intention to hold prices high suggest that nickel payables will likely remain at elevated levels. For nickel prices, expectations of tightening supply remain the core driver, and prices are expected to enter a phase of wide swings at high levels after the Chinese New Year holiday, which will drive nickel intermediate product prices.

Cost side, for key auxiliary material sulfur, the market was under pressure in the short term due to holiday sentiment disturbances. However, with the continuous release of Indonesian smelting capacity and sulfur's role as a core raw material for acid production, regional long-term demand support remains solid. Prices are expected to move sideways within a high range, with upside room in the long term. Nickel ore prices, nickel ore prices are expected to rise, influenced by the quota tightening news, the impact of the tailings landslide accident at the Indonesian IMIP park, and expectations of raw material stocking for new MHP project commissioning. From an overall perspective, the costs of MHP and high-grade nickel matte are expected to continue rising.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
[SMM Stainless Steel Flash] Xinfeng Special Steel’s Phase II Bright Annealing Line Successfully Produces First Coil
15 hours ago
[SMM Stainless Steel Flash] Xinfeng Special Steel’s Phase II Bright Annealing Line Successfully Produces First Coil
Read More
[SMM Stainless Steel Flash] Xinfeng Special Steel’s Phase II Bright Annealing Line Successfully Produces First Coil
[SMM Stainless Steel Flash] Xinfeng Special Steel’s Phase II Bright Annealing Line Successfully Produces First Coil
On February 8, the 6# line of the Phase II Bright Annealing (BA) unit at Xinfeng Special Steel’s cold continuous rolling stainless steel project successfully produced its first coil, with the 304-series material meeting qualification standards on its initial run. General contracted by WISDRI (South China) Thermal Engineering, the Phase II project utilizes a domestic-first four-stage horizontal bright annealing unit design, featuring the longest muffle and largest TV (Tension-Velocity) capacity in China. As a key component of Xinfeng’s strategy to build a green, intelligent factory, the line reached production capacity immediately upon commissioning and is currently undergoing further optimization and debugging to produce high-grade BA plates and tube-making stock.
15 hours ago
[SMM Stainless Steel Flash] TISCO’s Self-Developed SUS630 Stainless Steel Plates Break Import Monopoly in PCB Sector
15 hours ago
[SMM Stainless Steel Flash] TISCO’s Self-Developed SUS630 Stainless Steel Plates Break Import Monopoly in PCB Sector
Read More
[SMM Stainless Steel Flash] TISCO’s Self-Developed SUS630 Stainless Steel Plates Break Import Monopoly in PCB Sector
[SMM Stainless Steel Flash] TISCO’s Self-Developed SUS630 Stainless Steel Plates Break Import Monopoly in PCB Sector
According to TISCO (Shanxi Taigang), its independently developed SUS630 precipitation-hardening stainless steel cold-rolled plates are now being supplied steadily to domestic Printed Circuit Board (PCB) manufacturers. Throughout the recent holiday period, the company's R&D and production teams maintained strict quality control to ensure the material meets the rigorous standards required for 5G communications, automotive electronics, and medical devices. As a core material for the hot lamination process in PCB manufacturing, SUS630 was long dependent on foreign imports; however, TISCO has now become the only stable domestic supplier, successfully breaking the technical blockade.
15 hours ago
[SMM Stainless Steel Flash] Wenzhou Yigang’s 700-ton Precision Tube Project Receives EIA Approval
15 hours ago
[SMM Stainless Steel Flash] Wenzhou Yigang’s 700-ton Precision Tube Project Receives EIA Approval
Read More
[SMM Stainless Steel Flash] Wenzhou Yigang’s 700-ton Precision Tube Project Receives EIA Approval
[SMM Stainless Steel Flash] Wenzhou Yigang’s 700-ton Precision Tube Project Receives EIA Approval
The Wenzhou Municipal Bureau of Ecology and Environment officially issued and announced its approval decision regarding the Environmental Impact Assessment (EIA) for Wenzhou Yigang Steel Co., Ltd.’s project. The approved project involves the annual processing of 700 tons of precision stainless steel tubes. This regulatory milestone clears a major legal hurdle for the facility, allowing the company to move forward with the construction and subsequent operation of its precision tube production capacity in line with regional environmental standards.
15 hours ago
Register to Continue Reading
Gain access to the latest insights in metals and new energy
Already have an account?sign in here